If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Materials
• YarnArt Ideal 100% cotton yarn (beige) #233 50g/170m
• YarnArt Ideal 100% cotton yarn (milky) #222 50g/170m
• Iris by Kirov Yarn Mills (yellow) for banana or any other thin yarn
• Some Alize Miss 100 % mercerized cotton yarn (brown) #26 50g/280m
• Black embroidery floss
• 1.75 mm crochet hook
• 1 or 1.2 mm crochet hook
• 6 cm / 2.36 in diameter wooden teething ring
• 5 mm / 0.20 in safety eyes on
secure fastening
• Rattle insert (optional)
• Fiberfill for stuffing
• Rattle insert (optional)
• Sewing needle and pins,
scissors

Abbreviations
✓ st = stitch
✓ ch = chain stitch
✓ sc = single crochet
✓ inc = increase (2 single crochets in one stitch)
✓ dec = invisible decrease (2 stitches together working on front loops only)
✓ (…) = repeat between () number of times indicated
✓ […] = total number of stitches in the round or row
✓ Crochet in continuous rounds. Do not join or turn unless otherwise stated in the pattern.

Head
Working in rounds. Using 1.75 mm crochet hook
Start with YarnArt Ideal (milky) #222
Rnd 1. Sc 6 in magic ring [6]
Rnd 2. (inc) repeat 6 times [12]
Rnd 3. (sc 1, inc) * 6 times [18]
Rnd 4. sc 18 [18]– 1 round
Rnd 5. (sc 2, inc) * 6 times [24]
Rnd 6. sc 24 [24]
Rnd 7. (sc 3, inc) *6 times [30]
Rnd 8. (sc 4, inc) * 6 times [36]
Rnd 9. (sc 5, inc) * 6 times [42]
Rnd 10. (sc 6, inc) * 6 times [48]
Rnd 11. (sc 7, inc) * 6 times [54]
Now change yarn into YarnArt Ideal (beige) #233
Rnd 12-17. sc 54 [54]-6 rounds
Install safety eyes between round 6 and 7, with
the distance 8 sc between them.
Rnd 18. (sc 7, dec) * 6 times [48]
Rnd 19. sc 48 [48]– 1 round
Rnd 20. (sc 6, dec) * 6 times [42]
Rnd 21. (sc 5, dec) * 6 times [36]
Stuff half of the head and insert the rattle box.
Rnd 22. (sc 4, dec) * 6 times [30]

Rnd 23. (sc 3, dec) * 6 times [24]
Rnd 24. (sc 2, dec) * 6 times [18]
Rnd 25. (sc 1, dec) * 6 times [12]
Rnd 26. (dec) * 6 times [6]
Stuff the head completely with filler. The shape
of the head should be round and well filled.
Close the hole, fasten off and hide the thread
inside the head.

Body
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233
Rnd 1. Sc 7 in magic ring [7]
Rnd 2. (inc) * 7 times [14]
Rnd 3. (sc 1, inc) *7 times [21]
Rnd 4. (sc 2, inc) *7 times [28]
Rnd 5-8. sc 28 [28] – 4 rounds
Rnd 9. (sc 5, dec) *4 times [24]
Rnd 10. sc 24 [24] – 1 round
Rnd 11. (sc 4, dec) *4 times [20]
Rnd 12. sc 20 [20] – 1 round
Rnd 13. (sc 3, dec) *4 times [16]
Rnd 14-15. sc 16 [16] – 2 rounds
Stuff the body with filler it should be well filled. Fasten off and leave long thread for sewing.

Tail
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233
Rnd 1. Sc 6 in magic ring [6]
Rnd 2. sc 5, inc [7]
Rnd 3-23. sc 7 [7] –21 round
Fold the tail in half and crochet 3 sc through two layers!
Fasten off and leave long thread for sewing.

Ears (make 2)
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233
Rnd 1. sc 8 in magic ring [8]
Rnd 2. (inc) * 8 times [16]
Rnd 3. (sc 1, inc) * 8 times [24]
Rnd 4-6. sc 24 [24] – 3 rounds
Fold the ear in half and crochet 10 sc through two layers!
Fasten off and leave long thread for sewing

Arms (make2)
Front arm:
Working in rounds. Using 1.75 mm crochet hook
and YarnArt Ideal (beige) #233
Rnd 1. sc 6 in magic ring [6]
Rnd 2. (sc 2, inc) * 2 times [8]
Rnd 3-9. sc 8 [8] – 7 rounds
Fold the arm in half and crochet 4 sc through two layers!
Fasten off and leave long thread for sewing.
Back arm:
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233. At the very beginning. Before making MAGIC RING,
leave a thread about 20 cm long. See the pictures above. With its help we will sew the toy to the wooden ring!
Rnd 1. sc 6 in magic ring [6]
Rnd 2. (sc 2, inc) * 2 times [8]
Rnd 3-11. sc 8 [8] – 9 rounds
Fold the arm in half and crochet 4 sc through two layers!
Fasten off and leave long thread for sewing.

Legs (make 2)
Front leg:
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233
Rnd 1. sc 6 in magic ring [6]
Rnd 2. (sc 2, inc) * 2 times [8]
Rnd 3. (sc 3, inc) * 2 times [10]
Rnd 4-11. sc 10 [10] – 8 rounds
Fold the leg in half and crochet 5 sc through two layers!
Fasten off and leave long thread for sewing.
Back leg:
Working in rounds. Using 1.75 mm crochet hook and YarnArt Ideal (beige) #233.
At the very beginning. Before making MAGIC RING, leave a thread about 20 cm long. With its help we will sew the toy to the
wooden ring!
Rnd 1. sc 6 in magic ring [6]
Rnd 2. (sc 2, inc) * 2 times [8]
Rnd 3. (sc 3, inc) * 2 times [10]
Rnd 4-13. sc 10 [10] – 10 rounds
Fold the leg in half and crochet 5 sc through two layers!
Fasten off and leave long thread for sewing.

Banana
Working in rows. Using 1 or 1.2 mm crochet
hook and Iris yarn (yellow).
Start with foundation chain.
Rnd 1. ch 22 [22]
Rnd 2. Start in second chain from the hook: sl st
2, hdc 16, sl st 2, ch 1 and turn [21]
Rnd 3. FLO (front loop only) sl st 2, hdc 16, sl st
2, ch 1 and turn [21]
Rnd 4. BLO (back loop only) sl st 2, hdc 16, sl st 2,
ch 1 and turn [21]
Rnd 5. FLO (front loop only) sl st 2, hdc 16, sl st
2, ch 1 and turn [21]
Rnd 6. BLO (back loop only) sl st 2, hdc 16, sl st 2, ch 1 and turn [21]
Rnd 7. FLO (front loop only) sl st 2, hdc 16, sl st
2, ch 1 and turn [21]
Rnd 8. BLO (back loop only) sl st 2, hdc 16, sl st
2, ch 1 and turn [21]
Rnd 9. FLO (front loop only) sl st 2, hdc 16, sl st
2, ch 1 and turn [21]
Fasten off and Leave long thread for sewing.
Assemble the banana, sew it, stuff with a filler. The holes at the ends pull tight! Thread hide inside the banana!

Banana stalk:
Working in rounds. Using 1 or 1.2 mm crochet hook and Alize Miss (brown) #26
Rnd 1. sc 5 in magic ring [5]
Rnd 2-4. sc 5 [5] – 3 rounds
Fasten off and leave long thread for sewing.
Sew it to banana! The end hide inside

More Amigurumi Monkey İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

MATERIALS

• DK Weight Yarn in beige, brown, yellow and white
  (I used Paintbox Yarns Cotton DK in Coffee Bean, Vanilla Cream, Buttercup Yellow and Paper White)
• 2.5mm crochet hook
• 8mm safety eyes

• Black embroidery floss
• Polyester Fiberfill
• Floral wire
• Stitch markers, yarn needle, scissors

STITCHES/ABBREVIATIONS

• ch – chain
• sc – single crochet
• inc – increase
• invdec – invisible decrease
• SPsc – single crochet spike stitch

• pc – popcorn stitch
• sl st – slip stitch
• st/s – stitch/es
• (…) – indicates stitch count at end of round
• […] – repeat the instructions in brackets

SPECIAL STITCHES

Single Crochet Spike Stitch – Insert hook into the stitch in the row below and draw up a loop to the height of the stitches of the working round. Yarn over and pull through both loops on hook.

Popcorn Stitch – 4 dc in the same stitch. Remove your hook and insert it under both loops of the first dc. Grab the last dc with your hook and pull it through the first dc. Ch 1 to close.

NOTES

The pattern is written using US terminology and measures approximately 3.5″ (9cm) tall when using the materials listed.

Pieces are worked in a continuous spiral starting with a magic ring unless otherwise specified. Mark the first stitch of each round with a removable stitch marker.

Gauge is not important in this pattern. Use a hook size to match your chosen yarn. Make sure that your stitches are tight enough to prevent stuffing showing through and adjust hook size if necessary.

Head (start in beige)
R1: 6 sc in magic ring (6)
R2: [Inc] x6 (12)
R3: [Sc, inc] x6 (18)
R4-5: [Sc] x18 (18)
R6: Sc, inc, [2 sc, inc], sc (24)
R7: 9 sc, [inc] x6, 9 sc (30)

R8: 9 sc, [sc, inc] x6, 9 sc (36)
R9: [Sc] x36 (36)
R10: [5 sc, inc] x6 (42)
R11: [Sc] x42 (42) – change to brown in last st.
R12: [SPsc] x42 working into R10 (42)

Insert eyes between R7 and R8, in 1st and last inc.
Using 2 strands of embroidery floss, embroider the nose. Start just above the magic circle and sew a wide V over 2 rounds.
R13-19: [Sc] x42 (42)
R20: [5 sc, invdec] x6 (36)
R21: 2 sc, invdec, [4 sc, invdec] x5, 2 sc (30)
Start stuffing and continue to stuff as you go.

R22: [3 sc, invdec] x6 (24)
R23: Sc, invdec, [2 sc, invdec] x5, sc (18)
R24: [Sc, invdec] x6 (12)
R25: [Invdec] x6 (6)
Fasten off and weave in end.

BODY (brown)
R1: 6 sc in magic ring (6)
R2: [Inc] x6 (12)
R3: [Sc, inc] x6 (18)
R4: Sc, inc, [2 sc, inc] x5, sc (24)

R5: [3 sc, inc] x6 (30)
R6-9: [Sc] x30 (30)
R10: [3 sc, invdec] x6 (24)
R11-12: [Sc] x24 (24)
R13: Sc, invdec, [2 sc, invdec] x5, sc (18)
R14: [Sc] x18 (18)
Fasten off, leaving a long tail for sewing. Stuff.

ARMS (make 2, start in beige)
R1: 6 sc in magic ring (6)
R2: [Inc, sc] x3 (9)
R3-4: [Sc] x9 (9)
R5: [Invdec, sc] x3 (6) – change to brown in last st.
R6-11: [Sc] x6 (6)
Flatten and sc across (2) – do not stuff.
Fasten off, leaving a long tail for sewing.

LEGS (make 2, start in beige)
R1: Ch 4, sc in 2nd ch from hook, sc in next ch, 3 sc in last ch. Working on the opposite side of the ch, sc, inc in last ch (8)
R2: 2 sc, [inc] x3, 3 sc (11)
R3: 2 sc, [invdec] x3, 3 sc (8)

R4: 2 sc, [invdec] x2, 2 sc (6) – change to brown in last st
Stuff the toe lightly.
R5-7: [Sc] x6 (6)
R8: 1 sc, flatten and sc across (2) – do not stuff the rest of the leg.
Fasten off, leaving a long tail for sewing.

EARS (make 2, beige)
R1: 6 sc in magic ring (6)
R2: Ch 1, turn. [Sc, inc] x3 (9)
Fasten off and weave in ends.

Make 2, brown
R1: 6 sc in magic ring (6)
R2: Ch 1, turn. [Sc, inc] x3 (9)
R3: Ch 1, turn. Place the beige piece against the brown piece right side facing you and sc in each st on both pieces to join together (9)
Fasten off, leaving a long tail for sewing.
Repeat for the 2nd ear.

TAIL
R1: 6 sc in magic ring (6)
R2-21: [Sc] x6 (6)
Fasten off, leaving a long tail for sewing.

Take your floral wire and bend over the end so that there is no sharp tip to poke through the end of the tail. Insert the wire into the tail and trim with approximately 1/2″ sticking out of the bottom. Bend the tail as desired. This can always be adjusted later once it has been attached.

Note: I chose not to stuff the tail because my piece is so small. If you use a heavier weight yarn, you may want to lightly stuff.

FLOWER (start in yellow)
R1: 5 sc in magic ring. Change to white in last sc and sl st to 1st sc to join (5)
R2: Ch 2 (counts as 1st dc), 3 dc in same st and complete pc as normal. Pc in each stitch around. Sl st to the back of starting ch 2 to join (5 pc petals)
Fasten off, leaving a long tail for sewing.

ASSEMBLY

• Sew the head to the body. The front of the body should be positioned over R12 of the head.
• Sew the arms to either side of the body on R14.
• Sew the legs to either side of the body in a sitting position. The back of the leg should be in line with the back of the arm.
• Sew the ears to either side of the head between R13 and R14. Position the top of the ear a little bit higher than the eyes.
• Insert the wire that’s sticking out of the tail into the back of the body. You want to make sure that your finished monkey will sit flat. Sew to the body and bend to adjust as necessary so the base of the tail provides support so she can sit on her own.
• Sew the flower to the side of the head over R12.

More Amigurumi Monkey İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Legend:

sc – single crochet

hdc – half crochet

Head

Light thread

1. A chain of 8 ch, into the 2nd loop of 2sc, then one sc to each loop of the chain, last 4 sc, knit in a circle without turning in the opposite direction, then 1 sc to each loop of the chain, last 2 sc = 18 sc.

2. Increase x2, 1 sc x5, increase x4, 1 sc x5, increase x2 = 26 sc.

 3 – 4. 26 sc.

 5.1 sc x2, 2 hdc x9, 1 sc x15 = 35

 6. 1 sc x2, (increase of 2 hdc, 1 hdc) x9, 1 sc x15 = 44

Brown thread

7 – 12. 44 sc, 7 row knit for the back wall

 13. (20 sc, decrease) x2 = 42 sc

 14. (5 sc, decrease) x6 = 36 sc

Start filling with filler

 15. (4 sc, decrease) x6 = 30 sc

 16. (3 sc, decrease) x6 = 24 sc

 17. (2 sc, decrease) x6 = 18 sc

 18. (1 sc, decrease) x6 = 12 sc

Padding

 19. decrease x6 = 6, tighten all the loops with a thread of a different color, darker than the muzzle itself, behind the front thread of the 7th row of sc – 44sc.

Ears

Light beige thread

1.6 sc in amigurumi ring

2.2 sc

3. (increase, 1 sc) x6 = 18 sc

4. (increase, 2 sc) x6 = 24 sc

5. (increase, 3 sc) x6 = 30 sc

Brown thread

6. Connecting st in a circle = 30sl-st

Pens

Light thread

1.6 sc in amigurumi ring

2. The increase x6 = 12 sc

3.12 sc

Brown thread

4. Decrease x3, 1 sc x6 = 9 sc

5.1 sc, increase, 1 sc x7 = 10 sc

6 – 17.10 sc

 18. decrease x5 = 5 sc

Fill with filler

 19. tighten all loops

Legs

Light thread

1. 8 ch, in the 2nd ch 3 sc, 1 sc in the next 4 loops of the chain, 3 sc in the last loop of the chain, rotate 1 sc in 4 loops in a circle = 14 sc

2. Increase x3, 4 sc, increase x3, 4 sc = 20 sc

3.20 sc

Brown thread

4.20 sc

5. Decrease x3, 1 sc x14 = 17 sc

6.3 sc knit together, 1 sc x6, decrease, 1 sc x6 = 14 sc

7. Increase, 1 sc x6, increase, 1 sc x6 = 16 sc

8 – 9.16 sc

 10. (decrease, 1 sc) x5, 1 sc = 11 sc

 11. decrease x5, 1 sc = 6 sc

Fill with filler

 12. tighten the hinges.

Torso

1.6 sc in amigurumi ring

2. The increase x6 = 12 sc

3. (increase, 1 sc) x6 = 18 sc

4.18 sc

5. (increase, 2 sc) x6 = 24 sc

6.24 sc

7. (increase, 3 sc) x6 = 30 sc

8.30 sc

9. (increase, 4 sc) x6 = 36 sc

10 – 15. 36 sc

 16. (decrease, 4 sc) x6 = 30 sc

 17.30 sc

 18. (decrease, 3 sc) x6 = 24 sc

 19. (decrease, 2 sc) x6 = 18 sc

 20. (decrease, 1 sc) x6 = 12 sc

 21. decrease x6 = 6 sc

 22. tighten all loops

More Amigurumi Monkey İdeas